Are high flow water pumps worth it?
“Generally speaking, higher flow and higher pressure is beneficial to the cooling system,” he told us. “Higher pressure in particular raises the boiling point of the fluid, thus decreasing the likelihood of vapor forming in the coolant. This results in better cooling, rounder cylinders, cooler valves, etc.
How much HP does a 6.2 diesel have?
6.2L GM Diesel Specs
| Manufacturer: | Detroit Diesel ( a division of General Motors at time of inception) |
|---|---|
| Max Engine Speed: | 3,600 rpm (4,000 w/ no load) |
| Peak Horsepower: | • 130 HP @ 3,600 rpm (introductory) • 160 HP @ 3,600 rpm (peak) |
| Peak Torque: | • 240 lb-ft. @ 2,000 rpm (introductory) • 275 lb-ft. @ 2,000 rpm (peak) |
What is a high performance water pump?
HIGH PERFORMANCE WATER PUMPS This increases the pressure within the block to help prevent hot spots and steam pockets, as well as, improve coolant flow through the radiator. A nonrestrictive, high flow thermostat is highly recommended to enable the Milodon High Volume water pump to work to its highest capability.
Is the GM 6.2 diesel any good?
The 6.2 is a good and reliable engine. Downside is it is not a real popular engine for aftermarket parts availablility as compared to the Cummins 5.9 or Duramax 6.0 for example. If you need a good reliable engine that is easy and cheap to maintain, used for general light-duty pickup truck usage, this is a good choice.
How do you keep a racing engine cool?
Adding a coolant additive such as Red Line Water Wetter or Millers Extra Cool. These help to improve the cooling effect of coolant and will help to keep temperatures down. Evans Waterless Coolant is another type of coolant which will help to reduce temperatures.
Can you turbo a 6.2 diesel?
Rebuilding For Power. Rebuilding the 6.2L diesel is a comparatively cheap way to have reliable and capable diesel power. Instead of paying $6,500 for a crate 6.5L short-block, you can rebuild a 6.2L and kit it with a Banks turbo for about $4,500.
How long does a 6.2 diesel last?
Many big diesels are B10 rated at 400,000 miles and B50 rated at 800,000 miles. So, basically some big HD diesels often do last 1,000,000 miles between rebuilds. 6.2s are not HD.
How do I know if I need a short or long water pump?
Long water pumps measure from where they attach to the engine block to the pulley flange. They measure 7 inches for SB engines and 7 1/4 inches for BB engines. To determine if the pulleys remain on the car, check between the back of the pulley and the water pump.
How much can a 6.2 diesel tow?
6.2L EcoTec3 V8 Experience a whopping 13,400 pounds of maximum towing capacity with this beefy V8. You’ll experience 420-horsepower performance and an engine that outputs 460 lb. -ft. of torque.
How do you know when your water pump needs rotated?
Rotation is indicated on the head of the pump, you’ll see an arrow going counter-clockwise. This is the direction you want the pump spinning. If you turn the motor around and look at the backside and remove the cap, you’ll see a shaft located in the center.
What is hub height on a water pump?
A: “Hub height” is the industry term for measure a water pump’s height. The hub height is a critical belt-alignment dimension determining where the water pump pulley belt groove(s) fall in relation to your crank, alternator, power steering pump and air conditioning pulley grooves.