Can I use OpenDNS for my router?
For home users, OpenDNS can be configured on a computer or a router. If you have multiple computers in your home, it makes the most sense to set it up on your router. That way, all Internet traffic on your home network will see the benefits.
How do I change the DNS on my Dlink router?
Change the DNS servers on your D-Link router in the Setup menu. Choose Internet on the left side of the page. Select Setup at the top of the page. Find the Dynamic IP (DHCP) Internet Connection Type section and enter the primary DNS server you want to use into the Primary DNS Address field.
How do I configure my Dlink router DIR 600m?
Configure your Dlink wireless router
- In browser and type the router IP address 192.168.0.1.
- Enter Admin in the username field and admin in the password field. You can change the default password anytime by using router settings.
How do I find my DNS settings on my Dlink router?
Step 1: Create a DDNS account(username and password). Step 2: Log into the router by typing the router IP on the address bar. Step 3: Click on Tools and select Dynamic DNS from the left pannel. Step 4: Put a check mark in the box next to Enable Dynamic DNS and select your Dynamic DNS server from the list.
How do I reset my Dlink DIR 600m router?
To reset the DIR-600 router:
- Power on the router and flip it around so you have access to the back where the cables are connected.
- With a paperclip or another small and pointed object, press and hold the Reset button for 10 seconds.
- Wait about 30 seconds for the router to reboot.
What is the D-Link Dir 600m router?
The D-Link DIR 600M is an affordable home router helps you to share your Internet connection with other WiFi-enabled devices including Smartphones, Laptops, Tablets etc. This is an entry-level router capable of sharing speeds up to 150mbps.
How do I set up OpenDNS?
Click the Properties button. Select Internet Protocol Version 4 (TCP/IPv4), then click the Properties button. Click the radio button “Use the following DNS server addresses:” and type in OpenDNS addresses, 208.67.222.222 and 208.67.220.220, in the Preferred DNS server and Alternate DNS server fields. Click the OK button, then the Close button,…
What is the D-Link router configuration supplement-DNS relay?
D-Link Router Configuration Supplement – DNS Relay – This guide is designed to be a supplement to the router configuration instructions for D-Link routers. In addition to configuring your device to use OpenDNS for its DNS requests, please follow these steps to disable the DNS Relay functionality on the router to enable OpenDNS to work properly.