Do Fender Strats have a compound radius?

Fingerboard Radius: 9.5″-14″ Compound Radius (241 mm-355.6 mm) Scale Length: 25.5″ (648 mm) Nut: Synthetic Bone (Melamine) Nut Width: 1.6875″ (42.8 mm)

What are the dimensions of a Fender Stratocaster neck?

Fender Standard Series Stratocaster Guitar Neck Features: 25.5″ scale length. Modern “C” maple neck profile. 9.5″ radius pau ferro fingerboard plays like a modern classic.

When did Fender start using 9.5 radius?

Most prevalent is the modern 9.5 radius (241mm), which was adopted in the 1980s and is now found on about two thirds of Fender electric instruments. The next most common fingerboard radius, 7.25 (184mm), is a vintage-era spec now used on just under a third of Fender electric instruments.

What is the Fender Ultra Series?

The American Ultra Series consists of seven models – Stratocaster, Stratocaster HSS, Telecaster, Precision Bass, Jazzmaster, Jazz Bass and Jazz Bass V. Each instrument is manufactured at Fender’s factory in Corona, Calif.

How long is a Fender Stratocaster neck?

The Fender Strat neck has a relatively long scale length. It is 0.75 inches longer than its closest electric guitar rival in terms of popularity, which needless to say is the Gibson Les Paul. The latter’s scale length is 24.75 inches, while the Fender’s is 25.5 inches.

What are Stratocaster necks made of?

Fender necks are typically made of lighter-colored maple, so the darker walnut strip creates considerable contrast, and this is what long ago led to the affectionate nickname.

Which guitar neck radius is easiest?

Finding the perfect fretboard radius for small hands is one of the hardest things to do. But, if you have short hands and want to know the perfect radius for playing guitar, then we must tell you that everything between 12″ to 16″ will work for you.

What is the fingerboard radius of a Fender Telecaster?

As of summer 2014, a dozen or so modern Fender instruments have a more flattened 12” (305mm) fingerboard radius–and a single model, the Special Edition series Custom Telecaster FMT HH, has an even more flattened 15.75” (400mm) radius.

What is the standard size of a Fender fingerboard?

Both neck/fingerboards seen here in cross section are of the same width; note that the smaller vintage-style 7.25″ radius on the left yields greater fingerboard curvature than the longer modern 9.5″ radius on the right. Other fingerboard radii are seen on current Fender electric instruments far less often.

What is the correct string height on a guitar?

On instruments with compound-radius fingerboards, string height is typically set to match the fingerboard radius basically in the middle of the scale length; i.e., at or near the 12th fret.

What kind of guitar has a flat fingerboard?

Most classical guitars, resonator guitars, banjos, pedal steel guitars and some steel-string acoustic guitars, for example, have flat fingerboards. The fingerboard radius measurement itself refers to the radius of a circle from which a small segment of the circumference equal to the width of the fingerboard is taken.