How do I reset my Nissan Titan window?

Press and hold the window regulator motor reset switch. While holding the Reset Switch: Press DOWN and HOLD the window switch until the window is fully open. Do not use the window auto-opening function. Do not release the switch before the window is fully open.

Why will my car window go down but not up?

If your car window will go down but not up, then the problem is likely a bad window switch. Identifying a malfunctioning window switch is sort of the opposite of diagnosing a bad window motor.

How do I reset my power window motor?

Part 1 of 1: Reset the automatic window feature

1. Step 1: Turn the key to the accessory or on position.
2. Step 2: Make sure the windows are completely closed.
3. Step 3: Roll the window completely down.
4. Step 4: Roll the window completely up.
5. Step 5: Test the auto power window function.

Where is the fuse for the electric windows?

Problem: All Power Windows Do Not Work Check the fuse first. Refer to your owner s manual for the location of the fuse panel (usually located under the dash on the driver side, on the driver s side kick panel, or on a side panel in the center console.

How do you fix a window that won’t go up?

Here are some basic troubleshooting tips to try when your electric windows won’t roll up or down:

1. Check the window safety lock-out switch.
2. Check the fuses.
3. Push the window switch up and down and listen.
4. Push the window switch and watch the dash gauges.
5. Try the other switches.
6. Swap switches if possible.

Why does my driver window only work sometimes?

If only one window stops working, the problem could be a bad relay, fuse issue, bad motor, or the power window switch has failed. The most common reason for one window to stop working is the switch, so this should be looked at by a professional mechanic to have your power window switch replaced.