How do I reset my Oki drum counter?

How do I reset my Oki drum counter?

ANSWER

  1. Start the Status Monitor for the printer.
  2. Click on Printer Setup tab – Printer Menu button – Maintenance 1 tab.
  3. Click the [Reset] button next to Drum Counter, then click on the [OK] button to reset the drum counter.

How do you clean Oki image drums?

ANSWER

  1. Insert your finger into the recess on the right side of the machine and pull the front cover open lever (1) to open the front cover (2) forward.
  2. Press the open button (3) and open the output tray (4).
  3. Remove the image drum.
  4. Wipe the light-shielding film (5) with soft tissue paper.

How do I clean the printhead on my Oki printer?

ANSWER

  1. Press and hold the printer’s power switch for approx. 1 second.
  2. Press the OPEN button and open the top cover.
  3. Lightly wipe the LED head lens face (four places) with soft tissue paper.
  4. Close the top cover.
  5. If you will continue to use the printer, press and hold the power switch for approx.

How do I restore my printer to factory settings?

  1. Touch or swipe down the tab at the top of the screen to open the dashboard on the printer control panel.
  2. Select “Setup” and then select “Printer Maintenance”
  3. Select “Restore” and then select “Restore Factory Defaults”
  4. A message appears stating that the factory defaults will be restored.

How do I restore my printer?

It’s a pretty simple process:

  1. With the printer turned on, pull out the power cable from the back of the printer.
  2. Unplug the power cable from the wall outlet.
  3. Wait 15 seconds.
  4. Plug the power cable into the back of the printer.
  5. Plug the printer back into the wall outlet.
  6. Turn the printer back on.
  7. Run a test print.

How do you clean imaging drums?

Use an activated toner cloth, stretched tautly, and carefully wipe down the drum exterior to remove loose toner. Then use a cotton ball saturated with 99% pure isopropyl (rubbing) alcohol. Clean any patches of stubborn toner still attached to the drum. Use toner cloth or lint-free microfiber to clean the print rollers.

How do you clean an OKI LED head?

Cleaning the LED Head

  1. Turn the machine off.
  2. Open the scanner unit.
  3. Press the top cover open button.
  4. Open the top cover. Burns may result. The fuser is extremely hot. Do not touch it.
  5. Wipe the lens of the LED head with a soft tissue paper lightly.
  6. Close the top cover.
  7. Close the scanner unit.

How do I unlock my printer preferences?

Click on the Start Button. In the search box type “printers”. Select View Devices and Printers….

  1. Click on the Start Menu, select Printers and Faxes.
  2. Right Click on the printer icon, select Printing Preferences.
  3. The Printing Preferences dialogue opens.