How do I set up an additional view remote?

How do I set up an additional view remote?

Programming Remote Modes for xtraview to work

  1. Press and hold the “i-INFO” button until the green light flashes 3 times.
  2. After holding the “INFO” button for TV 1, in the remote settings it automatically activates mode 1. Note that it is important to change the settings in Mode 2 and 3 to relay or ignore.

Where are settings on DStv remote?

Press the DStv button • Go to “Settings” • Select System Settings • Select Remote Control • If the remote is set to TV1 mode, set mode 2 and mode 3 to Ignore. If the remote is set to TV2 mode, set mode 1 and mode 3 to Ignore. If the remote is set to TV3 mode, set mode 1 and mode 2 to Ignore.

How do I fix extra view?

THE FIX FOR ERROR E143-4

  1. Re check cable from the primary decoder – Check / try restarting your decoder.
  2. Check extra view port settings in the decoder settings.
  3. Check if heart beat is being received in the primary decoder settings.
  4. check and see if the pairing of the decoders is the same, to work on triple and extra view.

How do I set up DStv dual view?

All you need to do is purchase additional decoders and connect them to your primary decoder. The package you have subscribed to will appear on all the additional decoders, and you can now enjoy your favorite shows uninterrupted.

How do I use my DSTV app as a remote?

How to download and use a DStv Remote Control App

  1. Open the Android PlayStore app.
  2. Enter a Dstv remote app name: “PVR remote” or “Remote for DSTV”
  3. Install app.
  4. Connect to the internet when opening the app for the first time.

How do I change my DSTV remote from TV1 to TV2?

If the green light blinks below i, the remote is in TV1 mode. To set the remote to TV2 mode: press and hold the BACK button for 3 seconds or until you see the green light blink on TV2 (below the BACK button). If the green light blinks below BACK, the remote is in TV2 mode.

How do I change my DStv remote from TV1 to TV2?

How do I use my phone as a DStv remote?

How do I set up my DStv Extra-view remote control?

DStv Extra-view Remote Control Settings for TV 1, TV 2 Etc. To set your DStv HD decoder remote controller to work on primary decoder or TV 1; press and hold the INFO button or i-button for at least 3 seconds. Alternatively, press until until a green light blinks repeatedly on the tiny aperture just below the INFO button. (see image above).

Can I have multiple DStv exploras in the same room?

If you have multiple DStv Exploras in your home, or even in the same room, you need to set the remotes (and the DStv Exploras) to different “modes”, so that commands sent from one remote, won’t be picked up by the other decoder. This remote has 3 modes and can be set to mode 1, 2 or 3 (the default is mode 1).

How do I use my DStv HD Decoder remote controller?

To set your DStv HD decoder remote controller to work on primary decoder or TV 1; press and hold the INFO button or i-button for at least 3 seconds. Alternatively, press until until a green light blinks repeatedly on the tiny aperture just below the INFO button. (see image above).

What is DStv Xtraview?

DStv Xtraview is a way of linking 2 to three decoders under a single subscription. You pay an additional R100 for each decoder in the extra view. All decoders can watch different channels at the same time. Which decoders are XtraView capable? All new decoder models are capable of Xtraview.