How do you sync a second Wii Remote?

How to synch a Wii remote

1. Press the Power button on the Wii console to turn it on.
2. Open the SD Card Slot cover on the front of the Wii console.
3. Press and release the SYNC button on the inside of the SD Card compartment on the console.
4. When the Player LED blinking stops, the syncing is complete.

Why won’t my Wii read a disc?

The Unable to read the disc error occurs on the Nintendo Wii when the console cannot properly read a disc due to the disc being dirty or damaged, a dirty laser lens, or a laser lens/optical-drive failure. The chances of one of these issues occurring increases the longer the console has been in use.

How does the WiiMote work?

The Wii Remote uses a Broadcom Bluetooth chip to wirelessly send a constant stream of position, acceleration, and button-state data to the Wii console. The chip also contains a microprocessor and RAM/ROM memory for managing the Bluetooth interface and converting voltage data from the accelerometers into digitized data.

How do you sync a Wii Remote to the sensor bar?

Press and release the SYNC Button just below the batteries on the Wii Remote; the Player LED on the front of the Wii Remote will blink. While the lights are still blinking, quickly press and release the red SYNC Button on the Wii console. When the Player LED blinking stops and stays lit, the syncing is complete.

Why won’t my second Wii Remote Connect?

Open the SD Card slot cover on the front of the Wii console and press and hold the red SYNC button for 15 seconds. This will clear all synced Wii Remotes from the console. Resync the Wii Remote by removing the battery cover and pressing the red ‘SYNC’ button. Then press the SYNC button on the Wii console.

Does nunchuck have motion sensor?

Like the Wii Remote, the Nunchuk also provides a three-axis accelerometer for motion-sensing and tilting, but without a speaker, a rumble function, or a pointer function.