How much does it cost for 1 cubic meter of concrete?
The Labour cost for concrete work is around 70 to 75 Rs per cft (cubic foot) or 2500 to 2650 Rs per cubic meter (m3). The Labour Cost for PCC concrete is around 30 to 35 Rs per sq ft (square foot) or 320 to 400 Rs per cubic meter (m3).
How much is a cubic meter of concrete UK?
How Much Does Concrete Cost?
|Concrete Strength||Potential Uses||Estimated Cost per Cubic Metre (m3)|
|C20||Standard domestic projects||£90 to £100 per cubic metre|
|C25||Light domestic buildings||£100 to £105 per cubic metre|
|C30||Medium domestic buildings||£95 to £110 per cubic metre|
|C35||Commercial buildings||£100 to £115 per cubic metre|
How much is concrete per cubic metre in Australia?
Cost of Concrete per m3 Concrete slab costs in Australia vary and can be as low as $240 per cubic metre and reach as high as $320 per cubic metre.
How much does a concrete slab cost per square meter in Australia?
The cost of a concrete house slab per square metre in Australia ranges from $64 to $108 and most commonly the price depends on the thickness of the concrete slab as well as the location you are living in.
How much does a concrete slab cost UK?
The average cost of pouring concrete slab is about £150 – £200 per m3. Like with other types of concrete pouring, that price will vary depending on the quality of the concrete used, the size and complexity of the job, and where you live in the country.
How many 20kg bags of cement makes a cubic Metre of concrete?
108 x 20kg bags
one 20kg bag will cover an area of 1.1m2 to a depth of approximately 10mm. or 108 x 20kg bags equates to one cubic metre of mixed concrete.
How much does concrete cost Australia?
Expect to pay $50 to $75 per square metre for spray-on concrete, $60 to $85 per square metre for plain concrete, $75 to $90 per square metre for coloured concrete and $100 to $150 per square metre for exposed aggregate or a decorative stencilled finish. For the cost of concrete per m3, expect to pay $200 to $300.
What is 20 MPa concrete used for?
20 MPa and 25 MPa. Commonly used for house slabs, driveways, footings and footpaths. Residential slabs and footings. A default slump of 100 mm has been adopted by the premix concrete industry to reduce the uncontrolled addition of water on site and make placing and compacting of concrete easier for concreters. 32 MPa, 40 MPa, 50 MPa
What is the difference between 65 and 80 MPa concrete?
Special Class Concrete High strength 65 MPa, 80 MPa, 100 MPa Commonly used for projects requiring high strength concrete with options in design slump between 140 and 200 mm. 65 MPa concrete is available in 10 mm, 14 mm and 20 mm aggregate sizes while 80 and 100 MPa are only available in 10 mm and 14 mm aggregate size.
How do I choose the appropriate MPa for my concrete project?
Please refer to the table to choose the appropriate MPa when calculating your volume and price. Concrete is mixed with the correct “air-entrainment” (optimum air content). The following are some general guidelines. For garages, carports and any exterior flatwork that will be troweled, keep air in the low range – close to 5%.
What is the normal class of concrete?
Normal Class concrete Products ranging from 20 to 50 MPa compressive strength at 28 days with a design slump that has a point of acceptance from 20 to 120 mm are available in both 10 mm, 14 mm and 20 mm aggregate sizes. 20 MPa and 25 MPa Commonly used for house slabs, driveways, footings and footpaths.