How old is a Kenmore 80 Series washing machine?

Serial numbers on 70 and 80 series appliances usually have two letters followed by a seven-digit number. The second letter indicates the year the appliance was made. For example, the F in the 80 series washing machine serial number CF4227224 indicates the machine was manufactured in 1996.

Where is the model number on a Kenmore 80 series?

Check the back of the washer’s control panel, the upper left-hand corner of the back of the washer or the lower left-hand corner on the front of the washer. The model number might also be on a sticker under the lid or on the inside right back corner — open the lid to check this location.

What size is the Kenmore 80 Series washing machine?

Dimensions. The washer dimensions are 27 inches wide, 38 inches tall and 31 ½ inches deep. When the door is open the entire depth increases to 50 ½ inches.

Does a Kenmore 80 Series washer have a belt?

This is a direct drive washer and does not have a belt. This model uses a drive coupler. Please see the instructions provided below on how to replace the drive coupler for your Kenmore washer.

How to repair Kenmore dryer 80 series in 5 minutes?

Kenmore Dryer Repair. Search Help by Model. Your towels are wet, but your Kenmore dryer won’t start. Or, perhaps the dryer started, but you can tell it’s not spinning or heating, which means no fluffy towels for you. Before you pick up the phone and call a repair professional, take a look at our troubleshooting guide. Repair Clinic has

Does a Kenmore series 80 washer have a drive belt?

Your Kenmore washer does not use a drive belt. You have a direct drive washer meaning it has no belt. Your washer uses a motor coupler to connect the motor to the gear case. If the motor coupler breaks your washer will run but it will not agitate nor spin and only drain. Beside above, does a Kenmore 90 Series washer have a belt? No!

How many cu ft is the Kenmore 80 series washer?

Kenmore 21112 4.7 cu. ft. Top Load Washer w/ Built-In Water Faucet & Agitator – White (18) Sold by Sears. $1299.99 $1029.88. “kenmore 80 series washer cubic capacity” available for. shop in. Deliver Set Your Location. Pickup Set Your Location Today 2+ days. Sears Only. Category (11)

How to fix Kenmore 80 series agitator?

Place the top of the agitator onto the base and push down firmly to lock it in place. Ensure the slots are aligned with the tabs on the base. Reinstall the agitator onto the shaft in the tub. Reinstall the bolt, dust cover and top cap. Run a short wash cycle in your Kenmore washer to verify that the agitator works.