Is Loxon elastomeric paint?

The Loxon XP is manufactured by Sherwin Williams and elastomeric is a type of coating manufactured by many companies. Both types will seal your exterior walls and both have the ability to allow excess water out of your walls. The Loxon XP does allow more water vapor to pass through in less time.

What type of paint is Loxon XP?

Loxon XP Masonry Coating is a direct-to-concrete and masonry high-build coating. Offers maximum performance in one less coat compared to conventional and there is no need for priming.

What is Loxon XP used for?

Loxon XP is a high build coating that provides excellent flexibility, durability and weather resistance. This product will protect against wind-driven rain when used on tilt-up, precast, or poured-in- place concrete, CMU, and stucco. It is highly alkali and efflorescence resistant.

Can you use Loxon XP inside?

Loxon XP is an exterior product and shouldn’t be used inside. You can paint your foundation with it, or brick and stucco. Never use this coating on floors.

Can you spray Loxon XP?

LOXON XP IS EASY TO APPLY Spray it on. Roll it on. Or in smaller jobs, brush it on. For best results, this product should be applied at a minimum of 14 – 18 wft * (wet film thickness) and 6.4 – 8.3 mils dft (dry film thickness).

Can I spray Loxon XP?

How long does Loxon XP take to dry?

Coverage on porous & rough stucco 80 square feet per gallon. Recoat: 24-48 hours 24 hours Drying and recoat times are temperature, humidity, and film thickness dependent.

Can Loxon XP be used on brick?

Loxon XP is suitable for all types of concrete and masonry surfaces, including tilt-up, precast, poured-in-place, CMU, cement block and stucco.

Can Loxon XP be sprayed?

Considerations to minimize pinholes: • 2 coat application with overnight drying between coats • Spray application with backrolling • Power rolling Spray and backroll on porous & rough stucco to achieve required film build and a pin-hole free surface.

Is Loxon XP good for stucco?

The Loxon XP product is extremely thick; although the manufacturer suggests that it can be rolled directly onto the surface, we would highly recommend spraying this onto the stucco and back rolling (using a roller like you would paint walls to work the product into the stucco surface).

How long does Loxon take to dry?

Easily applied with a brush, roller, or spray without reduction. Loxon Conditioner bonds light chalk, and dusting concrete. Plus, since its dry to the touch in 30 minutes and ready for recoating in just 3 hours, you can finish the job the same day.

Is Loxon XP elastomeric or epoxy?

Simply so, is Loxon XP elastomeric? The Loxon XP is manufactured by Sherwin Williams and elastomeric is a type of coating manufactured by many companies. Both types will seal your exterior walls and both have the ability to allow excess water out of your walls. The Loxon XP does allow more water vapor to pass through in less time.

How do you use Loxon elastomeric?

• Cracks, crevices, and through-wall openings must be patched with an elastomeric patch or sealant. • Fill voids and openings around window and doors with an elastomeric patch or sealant. • Stripe coat all inside and outside corners and edges with 1 coat of Loxon XP coating.

What company makes Loxon XP masonry coating?

Loxon XP Masonry Coating / Waterproofing – Product Data Author The Sherwin-Williams Company Subject Product Data for Loxon XP Masonry Coating / Waterproofing Keywords Loxon XP Masonry Coating / Waterproofing , Product Data Created Date 2/14/2022 6:07:34 PM

What is Loxon XP?

Loxon XP is an exterior, high build. coating that provides excellent flexibility, durability and weather resistance. This. product will protect against wind-driven. Furthermore, how do I use Loxon XP?