What are shaft wall studs?

ClarkDietrich C-T Cavity Shaftwall Studs are rigid high-performance members engineered to maintain shaftwall integrity. C-T Studs are designed for use with 1″ thick gypsum shaftliner panels. C-T Studs are friction-fitted between top and bottom J-Tabbed Track.

How thick is Shaftwall?

Shaftwall is available in 18 and 33 mil thicknesses (25-20ga.).

What is a Shaftliner?

DensGlass® Shaftliner. DensGlass® Shaftliner is a 1 inch thick (25.4 mm) glass-mat gypsum panel used in UL fire-rated shaftwall, stairwell, area separation wall assemblies in addition to horizontal shaftwall and duct assemblies.

Can you paint shaft liner?

It is covered with an aqua, water-repellent paper facing on the front, back and long edges. Normal applications do not require finishing treatments, but the aqua surface will accommodate painting or other finishes after proper surface preparation.

How much does a sheet of shaftliner weight?

Product Data: Thickness: 1″ (25.4 mm) Width: 2′ (610 mm) Standard Lengths: 8′ (2440 mm), 10′ (3050 mm) and 12′ (3660 mm) Edges: Double beveled Packaging: Per piece Weight: 4.0 psf (19.5 kg/m2) For detailed Technical Data, please see the Product Data and Submittal Sheet.

What are the dimensions of a 34 Mil shaftwall stud?

USG CH Shaftwall Stud 34 mil “CH” studs are fabricated in web depths of 2-1/2″, 4″, and 6″ each with a short-flange width of 1-3/8″ and long-flange width of 1-1/2″. All C-H studs manufactured by CEMCO are produced from hot-dipped galvanized steel in standard G40 coating. G60 is available upon special request.

What are C-H studs made of?

“CH” studs are fabricated in web depths of 2-1/2″, 4″, and 6″ each with a short-flange width of 1-3/8″ and long-flange width of 1-1/2″. All C-H studs manufactured by CEMCO are produced from hot-dipped galvanized steel in standard G40 coating.

What size flange do I need for C-H studs?

2) The 2 1/2″ web X 1 1/2″ flange dimension for C-H Studs is a minimum requirement and larger sizes, i.e.; 4″ and 6″ (studs) are permitted system stud sizes under any UL certification. 0250H150-024 2 1/2″ x 1 1/2″ deep EU 30 0400H150-024 4″ x 1 1/2″ deep EU 30 0600H150-024 6″ x 1 1/2″ deep EU 30 STEELER® INC. Shaft Walls

What are the different gauges of shaftwall studs?

Steeler Shaftwall Studs are offered in the following gauges: 25, 30ES, 22, 20DW (030 mils), 20 (033 mils), and 18. Our C-H Studs meets or exceed all applicable UL/USG system design and Fire Resistance ratings and are therefore acceptable for use with listed wallboard gypsum products bearing the UL classification marking.