What are the buttons on my hot tub?

What are the buttons on my hot tub?

Most spas that have a temperature control included in the top side panel will have two buttons, a temp up button and a temp down button. Having these controls right at your fingertips makes getting the ideal temperature setting in your spa as easy as the push of a button!

Can you replace a control panel on a hot tub?

To replace the control panel is actually straight-forward and easy. Just turn the power of the unit off. Remove the spa access panel and take the cover off the control box. The wire from the topside panel to the circuit board needs to be removed.

Why is my hot tub control panel flashing?

Ensure the hot tub is heating. If the hot tub is not heating, the light is blinking because the water temperature has dropped more than 2 degrees from the set temperature. If this is the case and the hot tub is not heating, please see our article on “What Do I Do If My Hot Tub Stopped Heating”.

Why does my hot tub not turn on?

Tripped Breaker Check the main circuit breaker that provides power to the spa. This may be located in the home main panel, or inside a smaller panel near the hot tub. To reset a circuit breaker, first push it towards OFF, and then flip it back to ON.

How does a hot tub control panel work?

A hot tub control panel works like a timer, switch, and control point for the spa. It regulates temperature, displays chemical and heating issues, power failures, and filtration settings. The central control panel is usually located on the top part of the hot tub so people can easily access it.

How do I reset the high limit switch on my hot tub?

The hot tub high limit switch is sometimes triggered when you’re refilling your hot tub and can be reset by pressing the large red button on your spa pack.

What does PSoL mean on hot tub?

Pressure switch open with low pump
SESH = Sensor short, nonfunctional. Heater disabled but the spa is operational. PSoC = Pressure switch open with circulating pump. PSoL = Pressure switch open with low pump. PSoH = Pressure switch open with high pump.