What is a Fanuc post processor?

Post processor is a software subroutine(sub-program) which converts graphical or non-graphical CAM software toolpath outcome into a specific NC Control(Fanuc, Sinumeric, Mazatrol, Heidenhein) Deckel-Maho etc).

What is post processor in Packer?

Post-processors run after the image is built by the builder and provisioned by the provisioner(s). Post-processors are optional, and they can be used to upload artifacts, re-package, or more.

What is the role of the post processor in CAM software?

A post processor is software that translates CAD or CAM data to specific commands your CNC cutting machine can understand. Whatever CAD or CAM system you use, it has a certain point where it produces generic output called a “CL-file.”

How do I get AMI ID for Packer build?

How to Get the AMI id after a Packer build

1. ####Get the id from output file. You can write the build output to an output file and get the id from that file.
2. ####Run packer build with -machine-readable flag. Use the machine-readable flag and parse the id from the console output.
3. ####Get the ami id in the console.

What is Packer build?

The packer build command takes a template and runs all the builds within it in order to generate a set of artifacts. The various builds specified within a template are executed in parallel, unless otherwise specified. And the artifacts that are created will be outputted at the end of the build.

What is post processor for G-Code?

Post Processing is when you convert the image of the toolpath on your screen, into the language for a specific NC machine. This output is usually in the form of G-Code, an alpha numeric format used to drive the machine tool. Different machines will use variations of this G-Code format for their controls.

Can Packer build Docker images?

With Packer installed, it is time to build your first image. For speed, simplicity’s sake, and because it’s free to download, you will build a Docker container. You can download Docker here if you don’t have it installed.

What type of post is used for FANUC 6m control?

General post for mills using the Fanuc 6M control. Cincinnati Acramatic CNC-MC 2200B (Inch). General post for Cincinnati Milacron mills using the Acramatic CNC-MC 2200B control.

What kind of post do I need for a Fanuc CNC mill?

General post for mills using the Fanuc 6M control. Cincinnati Acramatic CNC-MC 2200B (Inch). General post for Cincinnati Milacron mills using the Acramatic CNC-MC 2200B control. This post is setup for vector type cutter compensation.

What are the different types of FANUC Bridgeport machining centers?

Bridgeport 380 series horizontal machining centers with Fanuc 6M/11M controls. Bridgeport 520 Machining Center (Inch/Metric). Bridgeport 520 series vertical machining centers with Fanuc 11M controls. Bridgeport Series II Mill (Inch/Metric).

Which post for the Phillips CNC 432 control?

This post is specifically designed for the Maho Model 600 horizontal machine center with the Phillips CNC 432 Control. It will support the model 500 with a minimal amount of changes to the output. Anilam (Inch). General post designed for mills using the Anilam control. Fadal Controls (Inch) Compatible with all Fadal Machines.

https://www.youtube.com/watch?v=scZ19X1rjhw