What is Nulon engine treatment?

This unique formula that contains activated PTFE (Poly Tetra Fluoro Ethylene, the slipperiest substance known to science) and other special additives, eliminates friction and smoothens the engine thus ensuring enhanced performance and total protection which helps in significantly increasing the life of vehicles.

How do you use Nulon oil?

DIRECTIONS FOR USE: Add one full bottle to the old engine oil prior to changing. Start the engine and run at idle or drive for a minimum of 15 minutes. Stop the engine and drain oil whilst warm (avoid scalding). Install new oil filter and new oil.

How do you use Abro oil treatment?

Directions: Pour 1 can of ABRO oil Treatment into the crankcase when your engine is idling and has warmed up to operating temperature. Add ABRO 500 with every oil change or when oil is added between changes. Rebuilt Engine: Mix 50% ABRO OIL TREATMENT with 50% engine oil to coat parts before assembling.

What is engine additive?

Engine oil additives are chemical compounds that improve the lubricant performance of base oil (or oil “base stock”). Motor oil additives have three basic roles: Enhance existing base oil properties with antioxidants, corrosion inhibitors, anti-foam agents and demulsifying agents.

Will thicker oil stop oil consumption?

Will Thicker Oil Stop Burning? Unfortunately, the thicker engine oil will not stop your car from burning oil. This solution has been brought up often, with the idea being that a more viscous oil will not flow as easily and have a more challenging time getting past worn-out valve guides.

Is Abro oil treatment good for engine?

ENHANCES PERFORMANCE – If you’re someone who’s riding an old bike, then Abro Petrol Oil Treatment can do wonders to your bike as it provides proper treatment to the engine and reduces the friction and unnecessary noise.

Is oil treatment good for engine?

Oil additives with high quality can reduce engine damage over time, extend the life of your vehicle, and improve its overall performance over time. In addition to extending the life of your oil by up to 50%, aftermarket engine oil additives preserve the essential additives in your motor oil.

Can you add oil additives after oil change?

A: It is recommended that you add the Oil Stabilizer with every oil change (20% Stabilizer, 80% Oil). You may also use the stabilizer to top off between oil changes in order to help reduce oil consumption in an older engine, or maintain peak performance in a new engine.

Can nulon modern engine treatment be used with any engine oil?

It is ideal for use in high performance, turbo charged and race engines. Nulon Modern Engine Treatment can be used with any type of engine oil, including Nulon fully synthetic engine oil. Nulon Modern Engine Treatment protects engines against cold-start wear and during everyday stop-start driving.

Why does my oil pressure drop when adding nulon?

The lower at-idle pressure and the addition of Nulon are related. Obvious confirmation: change the oil and filter again, but without Nulon, and normal at-idle oil pressure should resume. If that happens, you know it’s a better idea not to use Nulon. Oil additives are a con, mate.

Why choose nulon India?

With over two decades of expertise in the field, the brand caters to industries and individuals, both in India and overseas, which trust their engines and machines with the premium products of Nulon India.

Do you add additives to modern engine oil?

Modern oil is already knee-deep in additives that are engineered-in to achieve the performance dictated by the specification to which the oil must conform. It’s impossible to see how adding more would help, seeing as there’s no defect in the modern oil, which needs to be remedied.