What is the difference between 1410 and 1415 u-joint?
READ THIS: The 1415 series AAM universal joint is just . 007 NARROWER than the Spicer 1410 series. The bearing cap diameter is exactly the same for both. The two are not interchangeable and great care should be taken to be sure of the manufacturer of your driveshaft before ordering and installing any universal joints.
What is the difference between a 1350 and 1410 u-joint?
1350 joints are found in 1-ton trucks and use the wider body of the 1330 joint but with larger trunnions and caps. 1410 joints use a wider body but the same-size caps as a 1350 joint, making them perfect for high-horsepower, high-angle applications.
How wide is a 1410 u-joint?
4.188 inches wide
1410 series dimensions Dimension 4.188 inches wide in both directions….Universal Joint; Greaseable.
| Brand | Spicer |
|---|---|
| Package Qty | 1 |
| Weight | 1.85 LB |
| Country of Origin | United States |
What is the difference between 1310 and 1350 U-joints?
Size and strength. The 1310 series joint is what you would expect to find stock in most Jeep or small trucks. A 1350 series joint/shaft is what you might find in many full size trucks. While it’s not 100% accurate, you could say that a 1310 is a “half ton” joint and a 1350 is a “one ton joint”.
What is the strongest U 1310 joint?
1310 Series Spicer MAINTENANCE FREE Universal Joint Use this u-joint when you want the most strength out of a 1310 series universal joint. Stronger than a greaseable u-joint. Great for the street rod or muscle car owner who needs reliability and performance.
Are U-joints all the same size?
This allows you to mate a larger (or smaller) U-joint to the other. For example, you buy a new driveshaft that comes with 1350 weld-in yokes, but your car has 1310-sized yokes for the transmission and rear differential….U-Joint Sizes.
| Series | Width | Cap Diameter |
|---|---|---|
| 7290 | 2.622 | 1.126″ |
Are there different size U-joints?
The driveline consists of a slip yoke, the shaft, a bolt-in yoke, and two or more U-joints….U-Joint Sizes.
| Series | Width | Cap Diameter |
|---|---|---|
| 1310 Big cap | 3.219″ | Two 1.062″, Two 1.125″ |
| 1330 Big cap | 3.622″ | Two 1.062″, Two 1.125″ |
| 1350 | 3.622″ | 1.188″ |
| 1410 | 4.188″ | 1.188″ |
How much torque can 1310 u-joint handle?
According to Spicer, the 1310 joint is rated at 400 lb-ft of continuous torque (down the track) and 800 lb-ft of short-term torque (launch at the line). The 1330 has the same size caps as the 1310, but the U-joint cross is the same size as a 1350.