What is the difference between a 700R4 and a 4L60E?
You can’t tell the difference between a 700R4 and a 4L60E by the oil pan as they are nearly the same. If the transmission has a large 18-pin electronic connector above the passenger side pan rail, it’s a 4L60E, as seen here. If it has a cable connection near the cooler lines on the passenger’s side, that’s a 700R4.
What is the plug on the side of a 700R4?
the plug on the left side only controls the converter clutch. you really need to use the lock up feature,if not you will eventually burn up the trans. if you do a lot of interstate driving.as the converter will not get any cooling lube with the lockup feature not working.
How do I identify a 700r transmission?
The easiest way to identify if you have a 700r4 is to raise your car and check the bolts around the transfer case. The 700r4 and the 4L60 transmission uses a bolt pattern of 16 bolts, so if the transmission looks like the picture and you can see 16 bolts, you most likely have a 700r4 or a 4L60 transmission.
Can I put a 4L60E in place of a 700R4?
Premium Member. If the 4l60e is a one piece case and not the LS design removable bell housing the transmission are identical. The drive shaft, cross member required will be the same for both transmissions, 700R4 & Early 4L60E. The dipstick you have (Lokar) will work, but will need to be calibrated for full level.
Is a 700r a good transmission?
The 700R4, produced by General Motors/Hydramatic, is considered one of the best overdrive transmissions ever made. This transmission was introduced in 1982 as a replacement for the TH350 transmission, with the primary goal of improving fuel economy.
What years did Chevy use the 700R4 transmission?
700R4 Vehicle Compatibility – Makes & Models
| MODEL | YEARS |
|---|---|
| BLAZER | 1982-1991 |
| CAPRICE | 1982-1992 |
| CAMARO | 1983-1992 |
| SUBURBAN | 1984-1992 |
What does a 700R transmission go on?
The 700R4 was produced after all of GM’s engines went to the “corporate” Chevy pattern, which means that the transmission has a standard small-block Chevy bolt pattern. If you’re adapting the transmission to an older Buick/Olds/Pontiac or Cadillac engine, then you’ll need to use an adapter plate.
What cars came with 700R4 transmission?
You usually find the 700r4 transmission in GM cars like the Chevy Blazer, Suburban, Camaro, Corvette, Impala, and even in Oldsmobile Cars and many more. If we mentioned all car models this transmission was installed in, the list would be very long. A lot of people like the 700r4 because of its excellent durability.
What trucks have the 700R4 transmission?
The 700R4 was used widely on both truck platforms and rear-wheel drive car platforms. Some of the popular trucks it was used in were the Chevrolet Blazer and Suburban and the Oldsmobile 350 diesel. This transmission was also used in the Chevrolet Camaro, Corvette, Impala, and many others.
What transmission fluid do I use in a 700R4?
When installing the converter onto the transmission, please pour approximately one quart of ATF (automatic transmission fluid) into the converter before installing into the transmission. What transmission fluid do I use in a 700R4? This transmission can store about 11 quarts of transmission fluid and its recommended fluid is DEXRON VI.