What is the pitch of M30?

Thread Geometry – Metric Coarse

Table of Contents

Thread	Major Diameter	Pitch
M22	22.0	2.50
M24	24.0	3.00
M27	27.0	3.00
M30	30.0	3.50

What is pitch on metric bolts?

Metric fasteners are specified with a thread pitch instead of a thread count. The thread pitch is the distance between threads expressed in millimetres (measured along the length of the fastener). For example a thread pitch of 1.5 means that the distance between one thread and the next is 1.5mm.

Is 1.5 pitch coarse or fine?

Metric thread callouts are fundamentally different because the thread pitch (distance between each thread, in mm) is specified instead of threads per inch or per mm. For example, an M10x1. 5 (coarse) thread has a 1.5mm pitch, while an M10x1. 25 (fine) thread has a 1.25mm pitch.

What is the standard pitch of M16?

Metric Thread Pitch and Tapping Sizes

Size	Pitch (mm)	Tapping Diameter (mm)
M10	1.5	8.5
M12	1.75	10.2
M16	2.0	14.0
M20	2.5	17.5

What pitch is M16 fine?

1.5
Basic Metric Thread Chart (M1 – M100)

Diameter	Coarse Pitch	Fine Thread Pitches
M12	1.75	1.5
M14	2	1.5
M16	2	1.5
M18	2.5	2

What is the pitch of 3/4 UNC?

0.750
UNC Thread ANSI/ASME B1. 1

Nominal Diameter	Major Diameter Inch	Pitch mm
9/16″ – 12 UNC	0.563	2.117
5/8″ – 11 UNC	0.625	2.309
3/4″ – 10 UNC	0.750	2.540
7/8″ – 9 UNC	0.875	2.822

What is the pitch of M8 thread?

1.25
Basic Metric Thread Chart (M1 – M100)

Diameter	Coarse Pitch	Fine Thread Pitches
M8	1.25
M9	1.25
M10	1.5	0.75
M11	1.5

What pitch is a 1/2/13 thread?

0.45
Standard Thread Pitch Chart

Coarse Thread Series – UNC	Fine Thread Series – UNF
Nominal Size and Threads Per In.	Basic Pitch Dia.	Basic Pitch Dia.
3⁄8 – 16	0.3344	0.3479
7⁄16 – 14	0.3911	0.405
1⁄2 – 13	0.45	0.4675

What diameter is M16 thread?

The table below gives tapping drill sizes for threads corresponding to the thread pitches given in the table on page 3….Spanner and Allen Key Sizes.

Size	Spanner	Allen Key
M8	13 mm	6 mm
M10	17 mm	8 mm
M12	19 mm	10 mm
M16	24 mm	14 mm