When should V-Blocks be used?

V-Blocks are precision metalworking jigs typically used to hold round metal rods or pipes for performing drilling or milling operations. They consist of a rectangular steel or cast iron block with a 120 degree channel rotated 45-degrees from the sides, forming a V-shaped channel in the top.

Table of Contents

How many types of V-Blocks are there?

Magnetic V-Blocks are offered in two types i.e. soft and hardened. Clamps offered for Plain V-Blocks (Cast Iron and hardened and ground steel and Granite V-Blocks) on request.

Why are Vee blocks kept in pairs?

Vee Blocks are manufactured from cast iron and accurately machined to produce precise surfaces. Small vee blocks are sometimes manufactured from mild steel and case hardened. They are manufactured in pairs (which are numbered), and should be kept together, as they are identical.

What is the main purpose of a V block?

V-Blocks are work holding tools that improve an operators ability to properly hold down a work piece. The sides, base, and contact surface must be precision ground so that the work piece can have reliable and sometimes repeatable reference surfaces on which to machine the work piece.

What is the main purpose of V-block?

What is the size of V-block of Grade A?

‘B’ grade V blocks are made from closed-grain cast iron and ‘A’ grade V blocks are made from high-quality steel. V bock of grade A is more accurate and is found only up to 100 mm in length. V block of grade B is used for general work and is found up to 500 mm in length.

Why are vee blocks kept in pairs?

What is a magnetic V block used for?

Ideal for holding cylindrical and other complex workpieces for marking, spark erosion, grinding and measurement. The ‘v’ and the base are both magnetic.

Why are small vee blocks supplied with clamps?

Usually, one vee block has a clamp, allowing round section materials to be clamp in place. The other vee block acts as a support (see the diagram below). The clamp supplied with the vee block, has a knurled head with a hole through it, for a tommy bar. Vee blocks are ideal for marking round section material.

Can roundness be assessed using a V-block?

The V-block methods can be successfully used to measure the roundness and waviness deviations of large cylinders used in paper industry, shipping…

What is the use of V-Blocks Mcq?

Explanation: V-Blocks are generally used for cylindrical workpieces to check their roundness and for marking centres. V-blocks are like precision metalworking jigs which are used to hold workpieces.

What is the size of a V block?

V-Blocks; Type: V-Block ; Sold As: Individual ; Overall Width (Decimal Inch): 2.4000 ; V Angle: 90.00 ; Minimum Capacity of V (Decimal Inch): 0.2362 ; Maximum Capacity of V (Decimal Inch): 1.7322

What are the dimensions of the Vee block?

The vee block can be used on its sides as well as in an upright position. Matched accuracy of Models VB-515 and VB-520 is .0002″. Model VB-3 is not held to the same tolerances. 90 degree V’s are ground central, parallel, and square with the ends. Matched in pairs. 2 clamping blocks 1-1/2″ x 1-1/4″ x 1-1/4″, with capacity appx. 1″.

Can the Vee block be used on its side?

What is the accuracy of the VB vee blocks?

These vee blocks work vertically only. Matched accuracy of the Hi-Precision models VB-505 and VB-510 is .0002″. Models VB-05, VB-1 and VB-2 are not held to the same tolerances. 90 degree V’s are ground central, parallel, and square with the ends. Matched in pairs. Hardened and ground steel. All sides are ground square and parallel to each other.