Why are Perlick faucets better?

Perlick faucets are the industry leader because of their stainless steel construction and their unique forward sealing design. They are designed to drain completely when you are done pouring so there’s no beer left in the faucet to get sticky and skunky.

How do flow control faucets work?

What do flow control faucets do? Flow control faucets feature a built in flow compensator that allows you to adjust the resistance your faucet is exerting. That means less tubing and potentially less foaming and wasted beer.

Does perlick make a stout faucet?

Achieve an optimal stout or nitro infused coffee pour using Perlick’s stout faucet. Faucet is narrow and delivers a slower flow for a rich and creamy pour.

Why does my Kegerator pour slow?

If your beer is pouring slow and flat, the issue is most likely in the line. Lines that are too long or too thin, or both, will slow the flow of beer down too much, and knock too much co2 out of solution before it reaches the tap. So, as you pour, your beer will be less carbonated than it is in the keg.

How do you fix an over carbonated keg?

You Over Carbonated Your Beer To fix this, unhook the co2 and purge the head space. Leave the gas unhooked, and allow the dissolved gas in your beer to escape and fill up the head space, which typically takes a couple of hours or so. Hook up your gas at serving pressure and try again.

Why is my beer tap so foamy?

Too little pressure – If your keg has too little pressure in it it will cause the dissolved CO2 to free itself from the liquid. This causes gas bubbles in the beer lines or tap. If you can see bubbles in your beer line this is a likely cause.

How do you adjust the temperature on a perlick refrigerator?

Press and hold the SET button until the display shows the current setpoint temperature with the “F” flashing. 2. Use the UP and DOWN arrow button to scroll to the desired temperature. Press the DEFROST button (melting snowflake).

Why does my kegerator beer taste flat?

What PSI should a kegerator be?

between 5 and 12 PSI
Beer can be pushed at anywhere from 4 PSI to 14 PSI, but most kegerators work best between 5 and 12 PSI. You should compensate for the size of your beer lines – the bigger the inner diameter of the beer line, the more pressure that should be used to push the beer.