Why is my Securam lock beeping?
Standby status is indicated by two short beeps. The safe lock system automatically relocks after 6 seconds of being opened by a valid code. a) Repeated beeping (8 beeps) during an unlock operation indicates that the battery is low and needs immediate replacement.
How do I reset my La Gard electronic lock?
How to Reset LaGard Electronic Locks
- Open the door of the safe or room that uses the La Gard lock by entering the lock’s current combination.
- Press the “0” key six times, then enter the current six-digit combination one time.
- Enter the newly chosen six-digit combination two times.
How do you stop a stalwart beeping?
To resolve the issue do not remove the batteries, walk away from the safe and do not push any buttons for 20 minutes. After 20 minutes, if you know the code you can key it in to the lock and open the safe. If you do not know it, you will need to contact us to obtain the over ride code.
How do I stop my electronics from beeping?
Most standard systems will allow you to stop the beeping using one of the following methods:
- Disarm your system by entering your unique code.
- Arm your system and immediately disarm.
- Press the status button on your keypad.
How do you open a La Gard electronic lock?
LOCK RESPONSES Lock must be opened within 4 seconds once a valid combination has been entered. To open a container with a Swing Bolt Lock, turn the container handle to the open position and open the door. To open a container with a Dead Bolt Lock, turn the keypad or dial to retract the bolt and open the door.
How do I open a La Gard Safe?
Using the OPENING INDEX turn the dial to the LEFT and pass 50 three times and stop exactly on 50 the fourth time. 2. Turn the dial RIGHT until it stops. The combination lock bolt will retract and the vault may be opened.
What is the model number of securam ecsl-0601a?
SecuRam Systems Inc. U.S.A. Operating and Installation Instructions Model：ECSL-0601A Electronic Combination Controller Doc.No.:ECSL0601A071109 Version No.: V2.0020090209(E) ATTENTIONS:
What is a securam Electronic Safe Lock?
This SecuRam Electronic Safe Lock was installed as a replacement lock for a manual dial lock that quit working properly. I have a Liberty Gun Safe. The new lock mechanism mounted using all the existing holes.
What is the voltage of the ecsl0601a071109 battery?
Doc.No.:ECSL0601A071109 Version No.: V2.0020090209(E) ATTENTIONS: ● For indoor use only. ● Battery Low Voltage: 5.2 ± 0.2V.
What happened to your securam keypad?
The keypad failed after 6 uses — a replacement keypad had issues — and I learned from SecuRam that their lock mechanism was also faulty. I was locked out of my safe for a week, and because of the faulty mechanism, had to have the safe drilled to get it open — all this thanks to SecuRam. Got it to replace my original lock. Ran into a glitch.