How do you program a catx1b remote?

How do you program a catx1b remote?

To reprogram the remote transmitter please perform the steps below:

  1. Turn the ignition ON.
  2. Press and hold the valet/override button.
  3. Within 10 seconds the system will chirp (3) three times.
  4. Press 1 button of each transmitter you wish to program.
  5. The system will respond with 1 light flash for each accepted transmitter.

How do I use the code alarm key fob?

Operating the Code Alarm CA4053 Remote Start System

  1. To start the vehicle, press and release the button 2 times within 2 seconds.
  2. When you arrive at the vehicle, turn the ignition key to the ON position (Do not try to restart the vehicle), then step on the brake pedal to disengage the remote start.

What is the valet override button?

The valet button or switch permits the owner to temporarily bypass the alarm functionality of the system. To enter or exit valet mode, disarm the system with a working transmitter, your personalized manual override code, or using the procedure below which is to enter or exit valet mode.

How do I reset my Audiovox remote start?

Press and hold the programming button on your remote with the key held in the “Start” position, and wait for the LED light on the remote to blink for one second and then turn off.

How do I start the Code Alarm?

Operating the Code Alarm CA4552 Remote Start System

  1. To start the vehicle, press and release the button 2 times within 2 seconds.
  2. When you arrive at the vehicle, turn the ignition key to the ON position (Do not try to restart the vehicle), then step on the brake pedal to disengage the remote start.

How do I get out of valet mode?

How to Exit Valet Mode

  1. Insert your vehicle’s key into the ignition and turn to the “ON/RUN” position. Do not crank the engine.
  2. Press and release the LOCK and TRUNK buttons (I & III) simultaneously.
  3. Remove the key from the ignition and attempt to remote start your vehicle.