How do you reset a VOIP phone?

How do you reset a VOIP phone?

Press and hold # button while plugging the phone back in. Press 123456789*0# in sequence. After you press these buttons, the phone goes through the factory reset process.

How do I reset my yealink conference call?

How do I Reset a Yealink IP Phone to Factory Default settings?

  1. Log in to the web interface.
  2. Go to Settings → Upgrade page, select Reset to Factory Settings.
  3. Press OK to continue, press Cancel to quit.

How do I factory reset my Polycom phone?

Follow the steps below to factory reset your Polycom phone:

  1. Press the Menu or Home button.
  2. Select Settings > Advanced. The default admin password is 456.
  3. Select Administration Settings.
  4. Select Reset to Defaults.
  5. Select Reset to Factory.
  6. Select Yes to confirm.

How do I reset my Mitel?

To clear the current configuration, do the following:

  1. Press the Mute button (microphone with a slash through it)
  2. Use the phone’s keypad to dial 25327 (CLEAR) and press the # key.
  3. If the phone does not automatically reboot, press the Clear soft key.
  4. The phone reboots and the “Assign user” screen appears on the phone.

How do I factory reset my 7942?

Performing the Factory Reset on Cisco 7942, 7962 IP Phones

  1. Unplug the power cable from the phone and then plug it back in. The phone begins its power up cycle.
  2. While the phone is powering up, and before the Speaker button flashes on and off, press and hold #.
  3. Release # and press 123456789*0#.

How do I reset my PBX?

Reset the PBX

  1. Go to Maintenance > Reset.
  2. Select which data that you want to reset. Reset All: Factory reset all the data and configurations on the PBX. Reset IP: Reset the PBX’s IP address to 192.168. 5.150.
  3. Click Factory Reset.
  4. Enter the verification code.
  5. Click Reset.

How do I factory reset my yealink cp930w?

Factory resetting a phone is when you restore a device to its original factory settings.

  1. Press and hold down the OK button for 10 seconds.
  2. Press OK when it asks if you want to “Reset to Factory?”. Result: The phone will automatically reboot.

How do I factory reset my CP960?

Select the Settings tab on the top and select Upgrade from the side menu. Click Reset to Factory in the Reset to Factory field….Yealink CP960 Rebooting, Updating Firmware/configuration, Factory Reset

  1. Tap Settings>Basic Settings>Reboot.
  2. Tap Reboot.
  3. The device begins rebooting. The process may take a few minutes.

How do I reset my Mitel 5220 IP phone?

To Restore Factory Default Settings: Press *NO *until *TOOLS & FEATURES *appears and then press *YES*. 3. Press NO until *RESTORE DEFAULTS? *appears and then press *YES*.